I was making toys for my daughter! Such toys could be ordered, but not of such shape and it was not possible to use them as inserts  And began to move towards implementation. First of all I drew all vectors for CNC Then picked up the necessary tree. Then began complexity - the right tree was hard to get Milling - a lot of machines in the city, but people either can not or was expensive (run two cutters, with the beginning of the figure, then the chamfer on both sides)  Then coated the oil. History repeats itself, as with a tree) Here is and the first shapes are prepared: You expect to see a perfect figure with facets, and get a figure and a ladder between the chamfer and the plane, stairs, bullies, although the rock is solid. Okay, sand. Polish: Since the beginning of the manual, from large to very small abrasive (200/400/600/1000/1500) Then I guessed that the tree pores are too worn, the oil will not be absorbed(  Then I realized that in hand to bring not an option, I bought a sander Just was ready the main piece of wood - a place for inserts. It consisted of two elements, to be able to divide the colors of the inner and outer part Grinding machine coped by 1000% compared to manual grout, wood was nice to hold, it is perfect! no scratches, just no words! Of course, I forgot to say about the tests of colored oils, covered, waited 12 hours, looked at the result - removed the coating, covered with another. The Playground was made of solid mass, it was not convenient to grind inside the seats + the oil gave too dark effect in the corners (AO), and the Board for 1.5 year old child was heavy. In the photo just the first sample of this toy. Thanks for watching and thanks for reading))